All Products

Sublimation HTV's

25 products

Siser Dye Sublimation Glitter 12" HTV

Want to add dye sub to your cotton and non Sublimatable items? Siser Glitter 12" will allow you to apply the HTV to the product and then sublimate onto the HTV. Add some bling to your designs to stand out from the rest with Siser Glitter! When using Siser Glitter, you will get the most sparkle without all the shedding of glitter flakes on your hands! This is great for kids of all ages that love the shimmer look and it's safe to apply on their clothing too since it's CPSIA Certified. Siser white Glitter can also be directly sublimated too!

Dye sublimation ready
12" width material
Material may vary in width by a 1/2" – 1"
High-quality glitter with a textured feel
Works as embroidery applique
Glitter can be layered as top level or inlay (shown)
Laser friendly
Approximately 325 Microns/12.8 Mils thick
Note: Material may peel back from the liner. In that case, we recommend smoothing it down, if needed, prior to cutting
Not made for fine-cut designs
Composition: PU

GLITTER:

Instructions:

320°F
15 seconds
Peel Warm
Medium to firm pressure
Cut mirror image
Cotton, polyester, fabric blends, lycra, wool, linen
Wash warm, tumble dry normal

Dye Sub Instructions

400°F
40 seconds
Peel hot
Medium, even pressure

Additional Instructions

Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:

Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.

We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.

Cut Settings for Graphtec CE6000:

Settings can alter for each cutter and how dull or sharp the blade is. test cutting is recommended.

1. Offset: 0

2. Speed: 25 cm/s

3. Acceleration: 4

4. Cut Force: 23

Cut Settings for Silhouette Cameo:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Material: Heat Transfer, Smooth

Blade: 4

Speed: 8

Force: 11