Siser Aurora HTV

Aurora is a shimmering HTV that appears to change color when viewed at different angles. What sets Aurora apart is its finish that makes it appear textured while still feeling smooth. Siser Aurora offers color shifting properties and a textured look. Additionally, thanks to an opaque adhesive, Aurora colors retain their hues on both light and dark fabrics.

• Can layer
• Color shifting
• 190 microns/7.48 Mils Thick
• Presses at a low temp with low pressure
• Will not adhere to nylon
• Due to the manufacturing process, material may vary in width by 1/4-1/2"
• Composition: PU CPSIA Certified

• Medium pressure
• Cut in reverse
• Polyester, cotton, poly/cotton blends
• Wait 24 hours before first wash. Machine wash cold with mild detergent. DO NOT dry clean. NO bleach or fabric softener.

• 305° F
• 15 seconds
• Peel cold
• Medium pressure
• Cut in reverse
• Polyester, cotton, poly/cotton blends
• Wait 24 hours before first wash. Machine wash cold with mild detergent. DO NOT dry clean. NO bleach or fabric softener.

Additional Instructions

Additional Instructions Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:

Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.

We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment. Cut Settings for Graphtec CE6000: Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.

1. Offset: 0

2. Speed: 8 cm/s

3. Acceleration: 4

4. Cut Force: 18

*We use a 45 Degree Blade

Cut Settings for Silhouette Cameo:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Material: Heat Transfer, Smooth

Blade: 3

Speed: 8

Force: 10

Cut Settings for Cricut®:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Set Material: Iron-On 

Default Blade: Fine-Point Blade (Standard)