Description
Thick Silicone Dimensional HTV
- 10" width (9.75")
- 250 microns thick
- White in color
- Static liner
- Feels like rubber
- Cut shiny side up
- Recommend to use silicone sheets to cover when pressing
- Can be used with mesh
APPLICATION INSTRUCTIONS
- 285° F
- MUST BE COVERED WITH A COVER SHEET WHILE PRESSING, DO NOT OVER PRESS 10 - 15 seconds
- Peel cold
- Medium pressure
- Cut in reverse
- Polyester, cotton, poly/cotton blends
- Wait 24 hours before first wash. Machine wash warm with mild detergent. DO NOT dry clean. NO bleach or fabric softener.
Additional Instructions
Additional Instructions Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:
Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.
We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment. Cut Settings for Graphtec CE6000: Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.
1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 16
*uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Material: Heat Transfer, Smooth
Blade: 3
Speed: 8
Force: 6
Cut Settings for Cricut®: Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended. Set Material: Iron-On Pressure: Default Blade: Fine-Point Blade
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.