Printed Pattern Heat Transfer Vinyl - Purple to Green Ombre

Easy Patterns Printed Heat Transfer Vinyl

** EasyPatterns now require the use of our TTD High Tack Mask sold separately**


All the Variety Without the Extra Work!
EasyPatterns® are the wow factor you’re looking for! Available in several colors and patterns for a variety of niches, there’s bound to be a pattern that’s perfect for that next project. If you like the trendy options of EasyPatterns then you’ll love the easy cutting, weeding, and application. The pressure sensitive carrier allows for quick and simple weeding and releases easily with a hot peel after application. With a semi gloss finish and soft hand, EasyPatterns are the star of the show even when applied with a home iron!


EasyPatterns Apply to:

100% cotton
Poly/cotton blends
100% polyester
Leather
Lycra®/spandex


CUTTER SETTINGS: Cricut:

Blade: Standard
Setting: Iron On

Silhouette Cameo:

Blade: Standard, 3
Material: Heat Transfer, Smooth
Speed: 8
Force: 6

Scan N Cut:

Blade: Standard, 2
Cut Speed: 1
Cut Pressure: 1

Roland GS/GX-24:

Blade: 45°
Gram Force: 80-90
Offset: .250
Speed: 25-50 cm/s

Graphtec:

Blade: 45°
Gram Force: 9
Tool: CB09U+0
Speed: 25 cm/s

MH, SC2, LP3, and Titan 1:

Blade: 45°/60°
Gram Force: 80-85
Speed: 300mm/s
*Blade Advancing Varies

Titan 2 & 3:

Blade: 45°/60°
Gram Force: 60-65
Speed: 300mm/s
*Blade Advancing Varies


Visit our Facebook Page at: Vinyl and Tulle Supply

If you have any questions, call our customer service line at: 352-366-8840

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier hot or cold Application Instructions (heat press)

• Cut material – don’t mirror!
• Weed excess material
• Mask with TTD High Tack Mask
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold
• Cover and reheat for 2-3 seconds