Description
This listing is for a Quarter Pound Scrap Bag of mixed Siser Heat Transfer Vinyl.
1 POUND of MYSTERY HTV!! <3
This is a mixture of our mystery of all sizes scraps ( scraps may have minor defects but will still be usable) !
You get the experience of trying multiple opulent colors of Siser Easyweed, glitter, holographic etc, Heat Transfer Vinyl!
Its the perfect way to experiment with multiple colors and have an abundance of colors in stock.
Sizes, shapes & colors will vary, we will send what we have IN STOCK - every bag will be different and is NOT guaranteed specific htv!
( IT'S A MYSTERY! :D <3 )
The EasyWeed advantage! Lower temperature, HOT or COLD peel, no lifting, durability wash after wash, and lower pressure. It’s thinner than the competitors’ material and offers a one-step application that’s great for multiple layers. Comes on a pressure-sensitive carrier.
CUT INSTRUCTIONS:
Cricut:
Blade: Standard
Setting: Iron-on
Silhouette Cameo:
Blade: Standard, 3
Material: Heat Transfer, Smooth
Speed: 8
Force: 6
Scan N Cut:
Blade: Standard, 2
Cut Speed: 1
Cut Pressure: 1
Roland GS/GX-24:
Blade: 45°
Gram Force: 80-90
Offset: .250
Speed: 25-50 cm/s
Graphtec:
Blade: 45°
Gram Force: 8-9
Tool: CB09U+0
Speed: 30 cm/s
MH, SC2, LP3, and Titan 1:
Blade: 45°/60°
Gram Force: 80-85
Speed: 300mm/s
*Blade Advancing Varies
Titan 2 & 3:
Blade: 45°/60°
Gram Force: 60-65
Speed: 300mm/s
*Blade Advancing Varies
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs!
--------------------------------------------------------------------------------------------------------------------------------------
Application instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier hot or cold Application Instructions (heat press)
• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold
If you have any questions, call our customer service line at: 352-366-8840
Visit our Facebook Page at: Vinyl and Tulle Supply
www.vinylandtullesupply.com
1 POUND of MYSTERY HTV!! <3
This is a mixture of our mystery of all sizes scraps ( scraps may have minor defects but will still be usable) !
You get the experience of trying multiple opulent colors of Siser Easyweed, glitter, holographic etc, Heat Transfer Vinyl!
Its the perfect way to experiment with multiple colors and have an abundance of colors in stock.
Sizes, shapes & colors will vary, we will send what we have IN STOCK - every bag will be different and is NOT guaranteed specific htv!
( IT'S A MYSTERY! :D <3 )
The EasyWeed advantage! Lower temperature, HOT or COLD peel, no lifting, durability wash after wash, and lower pressure. It’s thinner than the competitors’ material and offers a one-step application that’s great for multiple layers. Comes on a pressure-sensitive carrier.
CUT INSTRUCTIONS:
Cricut:
Blade: Standard
Setting: Iron-on
Silhouette Cameo:
Blade: Standard, 3
Material: Heat Transfer, Smooth
Speed: 8
Force: 6
Scan N Cut:
Blade: Standard, 2
Cut Speed: 1
Cut Pressure: 1
Roland GS/GX-24:
Blade: 45°
Gram Force: 80-90
Offset: .250
Speed: 25-50 cm/s
Graphtec:
Blade: 45°
Gram Force: 8-9
Tool: CB09U+0
Speed: 30 cm/s
MH, SC2, LP3, and Titan 1:
Blade: 45°/60°
Gram Force: 80-85
Speed: 300mm/s
*Blade Advancing Varies
Titan 2 & 3:
Blade: 45°/60°
Gram Force: 60-65
Speed: 300mm/s
*Blade Advancing Varies
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs!
--------------------------------------------------------------------------------------------------------------------------------------
Application instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier hot or cold Application Instructions (heat press)
• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold
If you have any questions, call our customer service line at: 352-366-8840
Visit our Facebook Page at: Vinyl and Tulle Supply
www.vinylandtullesupply.com
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.